Tanaka 40 cc 2.0 hp, Two Cycle engine Complete kit
This is a complete kit including the engine listed above, plus the following parts that are needed to install on most bicycles:
1	Complete Engine Assembly (clutch drum, clutch rotor, engine spacer, bearings, housing) The housing is ¼ inch thick Aluminum Extrusion Channel (not a bent thin piece of steel) the channel is CNC machined and anodized black.
	The engine has a centrifugal clutch and are all easy pull start.
2	Drive Roller we use two ball bearings to support the CNC machined case hardened, zinc plated metal drive roller. Use the drop down menu when ordering.
	The smaller the drive roller the more pulling power you have, the larger the drive roller the faster top speed. We manufacture our drive rollers in 5 different sizes: .875 inch, 1.0 inch, 1.125 inch, 1.25 inch, and 1.5 inch.  This offers our customers the ability to fit our kits to accommodate every engine and virtually every rider regardless of size or riding conditions.
	Note: This kit has a 1 -1/4" drive roller and top speed from 26 to 30 mph
3	The U shaped mounting bracket
4	Engaging Rod, to raise and lower the drive roller, complete with all parts and hardware
	Note: you can add an additional engaging rod, Some customers like one for each side.
5	A 60 inch long Throttle Cable and finger / thumb lever for the throttle control. (Twist grip is extra)
	You can Add a longer throttle cable or a Twist Grip throttle. Use the drop down menu when ordering.
6	Remote toggle engine stop switch with handlebar mount for safety.
	Our drive rollers are CNC machined, heat treated & zinc plated.
7	Nuts and Bolts Plus many other small parts needed for mounting.
Tanaka 40 cc 2.0 hp, Two cycle engine. Mix at 40 to 1 ratio.
Most of these parts are preassembled for you.  The only parts you attach are the U bracket to the bike frame and the black housing to the U bracket, and then attach the engaging rod to the frame, throttle cable and remote stop switch.
Note: You may need other hardware that is not included in the kit depending on the style of bike.
You can Motorize any bike; we carry many PARTS for your custom installation and other size Friction Drive Engine Kits. As well as Engine Kits for Trikes. We also carry Chain Drive Engine Kits. Be sure and check out the Chain Drive Engine Kits if you need more power.
Please be sure and click on the Friction Drive GALLERY page to your left to see examples of our kits installed on various bikes and read some more information.
FDR-400- Tanaka 40 cc 2.0 hp, Two cycle engine. Mix at 40 to 1 ratio. Your choice of a 1", 1-1/8", 1 -1/4" or 1-3/8" drive roller and top speed from 26 to 35+ mph. Please be sure and click on the “Friction Drive” page to your left and read some more information. This is a complete friction drive kit that will mount to most bicycles. It includes the above engine, the housing is ¼” thick Aluminum Extrusion Channel ( not a bent thin piece of steel ) the channel is CNC machined and anodized black, we use two ball bearings to support the CNC machined case hardened - zinc plated metal drive roller, a centrifugal clutch, 60” throttle cable & lever, (Twist grip is extra) remote stop switch, engaging system, U shaped mounting bracket plus many other small parts needed for mounting. Instruction included and also on the web site. Be sure and pick the size of drive roller that you need.

  

  

Product SKU: FDR-400-1.25 Tanaka