Tanaka 35 cc 1.60 hp Two Cycle Engine Kit Friction Drive rear mount for Bicycle

Tanaka 35 cc 1.60 hp Two Cycle Engine Kit Friction Drive rear mount for Bicycle

This is a complete Rear mount friction drive kit with a 1-1/8" Drive roller that will mount to most Bicycles.

More details


$459.00

Product Options
Drive Roller Size
  Quantity:   

Description

Friction Drive Rear Mount Kit, with 1-1/8" Drive roller with the TANAKA 35 cc 1.70 HP Two Cycle - 2 Stroke engine, mix at 50 to 1 ratio.
This engine kit has the 76 mm clutch rotor - 78 mm clutch drum.

The most common size Drive Roller for this engine is: 1-1/8".

This is a complete Rear mount friction drive kit with a 1-1/8" Drive roller that will mount to most Bicycles.

The kit includes:

One: TANAKA 35 cc 1.70 HP Two Cycle - 2 Stroke engine, mix at 50 to 1 ratio.
One: Custom made 60" long throttle cable with the small lever & #16 mini hose clamp.

Four: 8” long Black Nylon ties to secure the throttle cable and stop switch wire to the frame.

One: Remote push button stop switch with connecting end (s).

Two: ¼” x ¾” x 15” long Aluminum flat bar, CNC machined and Black Anodized.

One: Alloy Skewer - Quick Release, 5m -.80 x 161mm with channel spacers and hardware.

One: "U" Bracket with backer plate, zinc plated with hardware

Four: 6mm x 1.0 x 45 mm Hex Head Bolts.

One: Engine spacer 3” OD, steel, CNC machined and zinc plated.

One: 5/8" Steel Shaft collar used as a spacer, zinc plated.
One: 78 mm Clutch Drum with a 1/2" hole.
One: 1/4" thick Aluminum Extrusion channel that is CNC machined and Anodized Black.

(Not a bent thin piece of steel like the others that have tried to copy my product)

Two 5/8” ID x 1-3/8" OD x 7/16" wide High Speed Double Sealed Ball Bearings with retaining ring.

We use one High Speed Double Sealed Ball Bearing on each side of the Drive Roller to support it and remove all the pressure off the engine.

What Drive Roller should I pick?
Most customers will need to order the 1-1/8" or 1-1/4" Max OD drive roller.
The 7/8" drive roller is good for riders over 250 lbs and / or if you have lots of hills with a top speed of about 22 mph. Mostly used with engines 1.10 HP and Higher.

The 1" drive roller is good for riders up to 200 lbs and some hills top speed is about 25 - 27 mph. Mostly used with engines 1.10 HP and Higher.

The 1-1/8" drive roller is the standard and most common size for riders up to 280 lbs with mostly flat ground that want a fast top speed about 30 mph. Mostly used with engines 1.60 HP and Higher.

The 1-1/4" drive roller and for riders 165 lbs or less and mostly flat ground 33+ mph.
Mostly used with engines 1.60 HP and Higher.

The 1-3/8" drive roller and for riders 150 lbs or less and mostly flat ground 35+ mph.
Mostly used with engines 2.0 HP and Higher.

This kit has the 1-1/8" Drive Roller.